Tag Info

What are the options to get a line level signal into an iPhone 4 or iPad? Not many. The current king-of-the-hill here is the Alesis IO Dock. It gives you two XLR-1/4" combo jack inputs that have adjustable impedence on them that'll let you go from consumer grade to professional grade line level and mic level input impedences. It also can do Hi-Z on ...

The CME UF-series keyboards support a built-in MIDI-over-wireless system. My first guess was the Rockband wireless keyboard. Unfortunately, it doesn't appear to transmit MIDI data over its bluetooth connection. If you are up for a DIY project, here are some instructions on building a wireless MIDI link using XBee radios. Should be able to fit inside the ...

Note: I am the author of MIDI Designer. Also: at the time this question was asked, MIDI Designer did not present its own virtual MIDI ports. That feature has been added. MIDI Designer can control other apps, even if the other apps do not present a Virtual MIDI Port. In addition, MIDI Designer allows you to selectively activate/deactivate virtual MIDI ...

You may want to try a different DAW to manage this project. I don't know about other DAWs, but Reaper uses non-destructive editing for the audio files. This means that no matter how many changes you make to the audio, the original files never change. You will only need to save a single copy of the original audio files and version the project file (which ...

From what I recall The room should be dark, so the tablet is the light source. Experiment with the brightness, but usually low is the way to go. Camera doesn't need to be extremely close, but the more zoom you use the more obvious vibrations will be. Put the DSLR in manual focus and adjust it so the tablet is just slightly out of focus - this will remove ...

You can do this - but only through system exclusive messages, I have made it work using the iPad app Midi Designer, and the Line 6 Midi Mobilizer. The system Ex command for Master change is f0 43 10 7f 03 0a 00 00 xx f7 xx is the master number from 1-128, but remember it will be master -1 in hex, so master A07 would be 06, Master C16 would be 2E (not 2F) ...

You've got the right idea stripping the RCA ends, but you will need to attach them to the input of the amplifier, rather than directly to the speakers. Try to trace the audio lines coming out of the record player, and attach your iPod cabling to wherever that goes. You'll probably want to test it out with something other than an iPod/iPad too - just in case ...

If you want your project to be editable, you must upload all of it. The easiest way to do this is throw it in a ZIP file. Everyone can open a ZIP file, and then it is just one thing to upload. Instructions for Windows/OSX. When you're done and have bounced everything down to stereo, encode it to MP3 as NReilingh suggested. MP3 is lossy compression, and ...

You need the Apple Camera Connection Kit which includes a connector with a USB outlet. Just use this and a USB cable to connect to your Mac. If the app supports CoreMIDI it should work just fine. You can check using "Audio MIDI Setup.app" on your Mac. This is also the place where you configure your Mac to use Wireless MIDI sent from an iPad. (no cables ...

Will I be able to record master-quality [...] recordings using my iPad? No, mastering is a complete post-process which require know-how (mastering engineering is itself a discipline separate from recording- and mixing engineering, although it can be combined). That being said, you may or may not be able to get a good vocal recording from a recording ...

Export your project to an mp3 file (256kbps should do it for the stereo bit rate) and upload it to your website's server. If this question is specific to the GarageBand app on the iPad, I believe the course of action would be to export a full-quality mix to iTunes and sync that back to your computer. You should then be able to find the track in iTunes, set ...

You actually have several options here: 1) Apogee Jam ($99) - direct line level signal into iPad / iPhone via the 30 pin dock connector. There are several other options as well but this is probably the industry leader currently. 2) Behringer USB guitar Interface ($30) works with the Camera connection kit no problems according to reviews. You can use the ...

Hello this is Daniel from Sonoma Wire Works. You can not add a drum beat to play as one of our metronome backbeats, but you can import a drumloop on a track and loop it as many times you would like using AudioPaste. When you copy from an AudioCopy enabled app and then paste into StudioTrack, you will be asked how many times you would like that loop to ...