Vibrational devices for converting analog electrical sound signals into acoustic vibrations through electro-mechanical resonance. Short for "loudspeakers"
0
votes
2answers
57 views
What causes the 130-133Hz hum in my KRK VXT6 monitors?
I bought a new pair of KRK VXT6 monitors last week and I think they sound amazing, but upon listening to some songs, I hear a weird noise specifically in the bass.
I decided to analyze the weird ...
0
votes
1answer
50 views
What is the optimal settings for KRK Rokit 5 Speakers? [closed]
I have a new pair of KRK Rokit 5 Speakers and I love them.. I haven't gotten to stretch their legs yet but they sound great so far.
I obviously want to get the most out of them and since they are for ...
1
vote
1answer
33 views
Passive monitor speakers with reference amplifier, how do I add a subwoofer?
I see Behringer makes a two channel reference amplifier the A500. This amplifier is well regarded at the price point. They also make the 2030p (passive) reference monitors: these speakers have ...
1
vote
1answer
34 views
How to troubleshoot audio imbalance?
Despite that the balance is set to neutral (middle) the right channel delivers clearly lower audio than the left channel for all I/O. I didn't try with headphones directly from the amp. The amp is ...
1
vote
0answers
70 views
How to connect passive speakers and bass bins?
I have 2 x passive kam 1000w (250w RMS) speakers and a Peavy PV 2600 Power Amplifier. The amp is 900 Watts RMS per channel into 4 Ohms and 550 Watts RMS per channel into 8 Ohms.
I would like to ...
-1
votes
1answer
33 views
Desktop speakers for a MacbookPro? [closed]
I have a reasonably small desk with minimal space behind it, and I am in a reasonably small room. I don't crank music very loud (but once in a while I enjoy something high volume), and I am far more ...
0
votes
2answers
308 views
Does setting “full-range speakers” duplicate the lower frequencies? [closed]
(Setup: 2.1, Klipsch B-2 bookshelf speakers, BIC PL-200 subwoofer, Yamaha RX-v667 receiver, fed over HDMI)
In Windows 7, in the sound devices configuration setup, there's an option to set ...
3
votes
2answers
91 views
Bass Inaudible In Mix Through Bad Speakers
I'm working on mixing an album right now, and it's all sounding pretty good but I'm having an issue with the bass. I really like the tone I have, but depending on the speakers it's being played ...
1
vote
3answers
102 views
Speakers crackle when input volume to amp is max
When i turn the volume of the input to my "amp" to the max, my speakers crackle. If i turn the volume down of the input and up for the amp, so the volume is the same as before, it's perfectly fine. My ...
-1
votes
1answer
70 views
Energy Take 5 speakers - Rear ones dead [closed]
Bought Energy take 5 speakers with Sony STR DN 1030 av receiver with Polk sub woofer. I installed everything, but sound does not come out of the rear Energy take speakers. Is there something that I ...
0
votes
0answers
120 views
Connecting Airport Express to 5.1 surround speakers [closed]
I just purchased a Yamaha 5.1-Channel Home Theater Speaker System without realizing I needed an receiver/amplifier, as well. All of the ones I can find seem to be intended for a home theatre system ...
1
vote
1answer
99 views
I want to add line out jacks to a digital piano with built-in speakers
I have a Casio Privia PX575r Stereo Piano.
Both the left & right channels have their own onboard [LF]woofer AND [HF]tweeter. On each L & R stereo channel I intend to install an onboard 'line ...
2
votes
2answers
65 views
What is the cheapest way to produce a lot of bass?
I'm trying to soundproof one room from noise coming from another room. I won't know how much bass will be generated from the other room until after the soundproof job is done.
So I want to assume the ...
0
votes
1answer
105 views
Audio output from Mitsubishi HC4000 to speakers doesn't work
I don't manage to output the audio from my projector Mitsubishi HC4000 to my harman speakers, with a RCA to 3.5 jack adaptor.
I've connected the adaptor to the blue and red RCA output in the ...
7
votes
4answers
239 views
Is it a good idea to use headphones for audio production?
Is it generally a good idea to use headphones in the production/mixing of audio?
And what can I do if my speakers are terrible (e.g. laptop speakers), and I'm on a shoestring budget?
1
vote
1answer
138 views
What do I need to know to decide if an amp will work with speakers?
I have a pair of speakers from a Kenwood DG55.
Here's the commercial for it from Japan, circa 1989:
...
1
vote
1answer
134 views
Front of house speakers cut in and out for low volumes
The sound system at our church cuts in and out if there are only low volume sounds being played, such as soft pad on a keyboard or background music off a computer.
I have a suspicion that this might ...
0
votes
2answers
985 views
Best cable to connect guitar amp to speaker cabinet?
What's the best 1/4" cable (brand, gauge, etc.) to connect a guitar amp head to a speaker cabinet? I have a run of under 10 feet. I read using an instrument cable can damage the amp and speakers.
0
votes
2answers
696 views
Hook up iPod/iPad to old stereo (No inputs)
I have an old turntable/stereo unit. There is no radio or tape deck on this. Just the turntable and speakers.
Looking for a way to hook my iPad/iPod into it so it.
I do have an 1/8 inch to RCA ...
1
vote
0answers
216 views
Which reference monitors should I buy for my home studio? [closed]
I am in the market for reference monitors for my home studio. I will be mixing both instrumentals and vocals. I am not concerned about using these speakers in any live scenarios.
I am primarily ...
6
votes
1answer
480 views
How can I pop out a pushed in woofer dome?
My 4 year old decided to push in the soft plastic/vinyl domes in the center of two of my M-Audio LX4 studio monitors' woofers.
Can anyone suggest a safe way to pop them back out? I have heard of ...
2
votes
1answer
129 views
What's a semi-objective way to evaluate a live audio setup for a small-medium sized acoustic band?
So I'm hoping this is "answerable" :) We are a small band (two vocals, two acoustics, keys, sometimes an electric guitar, sometimes drums). Stopping by a Guitar Center there was a lot to look at, ...
0
votes
1answer
4k views
Connecting ordinary 3.5mm speakers to S/PDIF?
Not sure if this is the best place for this question, but here goes anyway. I recently got myself the Logitech Revue to stream Netflix etc. However, my TV has extremely poor 7W speakers and that makes ...
1
vote
1answer
150 views
What do the pros look for when shopping for quality PA speakers?
I'm building a sound system that will be used to pipe high quality audio throughout a warehouse. It will also be used as a PA (Public Address) System. Right now I have generic off-the-shelf speakers ...
5
votes
1answer
647 views
Will a magnetically shielded studio monitor mess up my hard drive?
This may be a noob question and if it is, bear with me. :)
I've got a pair of M-Audio Studiophile AV-40s that I'm wanting to put on my desk. The product description on Musician's Friend says...
...
5
votes
2answers
142 views
How do I generate a chord (one bit)?
for a project, I am trying to generate a sound by directly accessing a loudspeaker.
I can send a one-bit signal to the speaker and I know how to generate simple sounds by controlling the frequency ...
2
votes
2answers
916 views
How to transmit sound from my microphone to my speakers?
Sorry I feel like an idiot asking this, but hey, I don't know what I don't know.
I have a microphone and some speakers and some box like things that you can attach speakers to (pictures here), and I ...
3
votes
2answers
538 views
Are there any speakers which can play binaural audio?
I'm trying to play binaural audio (generated by applying an HRTF based on sound source positions in a small game) over stereo speakers. Ideally, this would require cross-talk cancellation to be ...
8
votes
1answer
148 views
Can opening closed speaker cabinets for service affect the sound?
I have two pairs of speakers that could do with opening them up to investigate problems--one decades-old set of Celestion hi-fi speakers that has developed a rattle, the other a set of M-Audio ...
-4
votes
1answer
349 views
Looking for high quality small speakers for my home [closed]
I spend most of my time programming in my work room, and would like to enjoy my lossless, audiophile music without having to crank up the whole neighbourhood.
Something that can sound very good and ...
3
votes
2answers
340 views
Easy solution for controlling 5 or more speakers from a single computer
I work in a sensory research lab and we wanted to set up 5 or more speakers and control them with one computer, probably running Matlab. Is there a ready hardware solution for controlling 5 or more ...
3
votes
1answer
204 views
How to evaluate home studio monitors?
I'm looking for a good pair of studio monitors for a home project studio. The room is 12'x12'x10' and I'll be seated about 4' from the speakers. Budget is about $500-600 per pair.
What features do I ...
5
votes
2answers
11k views
6 ohm speakers and 8 ohm receiver
I have a Sony Receiver STR-710 and by specification it's 8 ohm only and output power 6 x 100 Watts . I'm wondering should I buy two pairs of Yamaha NS-777 speakers which are 6 ohm 100/250 Watts.
Will ...
8
votes
4answers
5k views
Do new speakers require a “break-in” period?
Some speaker manufacturers* claim that one must "break in" their speakers for a given period of time before they sound optimal. This sounds fishy to me. Is there any reason speakers should need a ...
2
votes
1answer
433 views
I am purchasing an active mackie speaker - do I need a preamp?
I am purchasing either an Active Mackie srm 350 or srm 450. I understand that these include an amplifier (as they are active speakers) as part of the design.
As a simple example, if I wanted to ...
0
votes
1answer
251 views
Adjusting PC's speaker output in realtime
Is there any software available that allows me alter my PC's speaker output in realtime?
I'd like to be able to change pitch. I'm used to editing my speakers properties in the enhancements tab but ...
1
vote
2answers
323 views
Mixing Alnico and Ceramic on 1969 Fender Bassman
I am a classic amp collector, and have a great number of great pieces. I also run a recording studio and a reamping service.
I found at a great price a 1969 Fender Bassman TEN (silverface) ... a 50W ...
2
votes
1answer
153 views
Should I store my EONs outside?
I live in an apartment, and my two 15" EONs are taking up a bunch of room. I have some covered, semi-insulated space outside that could accomodate them, but I'm worried that changes in temperature ...
3
votes
1answer
379 views
How can I tell whether speakers are magnetically shielded?
I have recently "inherited" a 2003 Philips sound system with fairly decent compact speakers.
The specifications in the manual do not appear to state whether the speakers are magnetically shielded. ...
3
votes
1answer
240 views
Speakers to 3.5mm jack?
wasnt sure whether this was better-suited to the Electronics stackexchange. If so please could you migrate it there?
I have just moved into a much smaller flat and due to the size, I can't fit my ...
11
votes
4answers
401 views
What should I look for when buying a subwoofer?
I've got a pair of studio monitors which I'm very happy with, and am considering matching them with a sub. Since I can only hear the sub in the store, and without the benefit of hearing how they'd ...
